Airbus Helicopters 3D prints A350 components which are 45% lighter and 25% cheaper
Airbus Helicopters in Donauwörth, Germany, is manufacturing doors for all Airbus aircraft programmes as a supplier. The redesign of the latch shafts and the new production process have resulted in…
Airbus Helicopters in Donauwörth, Germany, is manufacturing doors for all Airbus aircraft programmes as a supplier. The redesign of the latch shafts and the new production process have resulted in Airbus’s first large-scale production using metallic 3D printing.
The process
The latch shafts are made using an EOS M 400-4 printer and are composed of titanium powder. Four laser beams melt the powder and produce the desired components layer by layer. This method allows parts to be created from much less material, making them lighter, yet just as sturdy as the original component. Up to 28 latch shafts can be produced in a single printing process.
Printed latch shafts are 45% lighter and 25% cheaper to produce than traditional ones, Airbus says. As each A350 has 16 latch shafts, producing these parts using 3D printing leads to a saving of just over four kilos per aircraft. Airbus Helicopters plans to deliver 2,200 components a year once production is fully operational.
Qualification is scheduled to be completed at the end of 2018, with serial production starting in early 2019. The first A350 components – with serial number 420 – are set to take to the skies in 2020.
Scaling it
Airbus Helicopters has already started preparations to produce an even larger group of A350 door components using 3D printing, and this method is also expected to be used to produce helicopter components.
Luis Martin Diaz, Head of Industrial Service Centres,, Airbus Helicopters Donauwörth, said: “Our goal is to get developers making more use of 3D printing. This means that 3D printing should be taken into consideration right from the initial planning stages for new components, which may be able to be manufactured particularly easily and cost-effectively using this method.”
He added: “Weight savings are especially important when it comes to helicopters. Airbus will start preparations for the industrialisation of 3D-printed helicopter components this year.”
Subscribe to our weekly newsletter